Open table laser cutter Co2 for cutting metal , stainless steel , uncoated metal , plastic and others.
Power : ~150W RECI
1325BM – 1300*2500mm
1530BM – 1500*3000mm
2030BM – 2000*3000mm
Open Table: Sword-type table with honeycomb overlay | Wi-Fi | RDWorks | Red Cross | Ruida Control System | Autofocus* | Lifted table (Up & Down) | Compressor | Professional cooling system | Efficent fan | CCD* | Manual PL/EN | 5 years of warranty
WS-BM Series – cutting metal function.
It is characterized by an open cover available in three sizes, with a special cutting head with „Metal & Non Metal” cutting function and RECI laser tube with power of W6-~150W . WS-BM Series is designed mainly for cutting non-metal and metal materials up to a thickness of 1. 5 mm. It is the most comprehensive and universal laser on the market in the Co2 offer.Laser allows you to cut carbon and stainless steel with high precision by using dynamic autofocus sensor placed in head, which maintains a constant distance of ~1mm to the workpiece material in real mode.
WS-BM series is equipped in standard with a sword-type open table with an additional adapter of a honeycomb overlay, Wi-Fi controller, laser marker of a “Red Cross” type and professional cooling system. The open table allows to processing of large sheets, and the backlit working area through LEDs makes it easier to observe the operation of the device.
All Weni Co2 lasers have stainless steel joint elements, high quality branded sub-assemblies, stable, tension free construction and thanks to the use of Wi-Fi controller, it is possible to control many lasers with only one computer. The operation of Weni Co2 lasers is easy and intuitive, based on the RDWorks professional software and reliable Ruida controllers.
Basic configuration of WS-BM model WS1325 includes:
– 1300x2500mm working area
– Power ~ 150W tube RECI W6
– Open table
– Additional honeycomb type overlay made for cutting and facilitating smoke extraction
– “Red Cross” to precisely indicate the working place of the laser beam – helpful in positioning
– CW3200 professional cooling system for a laser tube with automatic device shutdown at too high operating temperature
– Compressor activated only for work, used to cover the lens against dirt and to support the cutting process
– Exhaust gas extraction system with a fan
– Wi-Fi / USB / Ethernet TCP / IP communication
– LCD display
– RDWorks software
– Manual PL / EN
– 5 years of warranty
The configuration of the WS-C series can be modified in the following scope:
– Power (RECI W2, W4, W6)
– Table size (model)
– Electrically lifted table
– Spindle (rotary table)
– Autofocus (automatically set focal length)
To check all the options go to the „product configurator” or contact us.
|Working Field||1300 x 2500mm||1500 x 3000mm||2000 x 3000mm|
|X – axis range||1220mm||1420mm||1920mm|
|Y – axis range||2500mm||3000mm|
|Z – axis range||80mm|
|Addressed Resolution||4000 DPI|
|X/Y axis positioning accuracy||≤+0.05mm|
|X/Y axis repeatability||≤+0.03mm|
|X/Y axis maximum speed||70000mm/min|
|Z axis maximum speed||375mm/sec|
|Working table type||knife and honeycomb / open|
|Maximum platform load||200kg|
|Working area lightning||YES- LED|
|Minimum character size (engraver)||1mm x 1mm|
|Positioning||laser marker “Red Cross” type|
|Head Type||Metal&Non Metal- metal cutting function|
|Autofocus||YES – for metal cutting|
|Lens Type||quartz Φ 25mm|
|Source type||Glass tube Co2 – RECI, 10.6μm|
|Motors||Leadshine – High Precision stepper motors|
|Security Drives||proximity sensors – double for each axis|
|Drive transmission||Drive Belt|
|Guides||THK / HIWIN / PMI|
|Jointing units||stainless steel|
|Head drive||screw drive|
|Operating System||Windows XP or higher|
|Communication||Ethernet TCP/IP / WiFi / USB|
|Compatible software||COREL DRAW, PHOTOSHOP, AUTOCAD,TAJIMA,etc.|
|Supported file formats||.ai .dxf .plt .dst .dsb .eps .bmp .gif .jpg .jpeg .png .mng .ico .cur .tif .tiff .tga .pcx .wbmp .wmf .emf .jbg .j2c .jpc .pgx .ras.pnm. pgm .ppm .ska .raw|
|CCD Camera/ contour cut||*option – shape detection or markers|
|Laser power control||0 – 100% controlled by software|
|Maximum gas pressure in the installation||1000 kPa (10 bar)|
|Rotary table / spindle||*optional|
|Ventilator||YES – exhaust extractor|
|Cooling||chiler CW3000 / CW5000 / CW 5200|
|Maximum energy consumption||~2,4kW|
|Temperature operating range||10-45°C.|
|Power System||1-phase / 220V 50Hz voltage fluctuations >10%|
|Dimensions (length * width * height)||3200*2000*1200mm||3700*2100*1200mm||3700*2500*1200m|
Tube power [W]
Metal&Non Metal cutting head with auto focus. A special type of head that allows you to cut metal (carbon steel, stainless steel).
The head is software-controlled using a capacitive sensor, and
durable screw drive. The head creates perfect laser cutting every time, even on hardened and solid stainless steel. Complex contours, small holes and narrow firings are precise and accurate.
RECI laser tubes are characterized by high durability and precision. Their real life span is ca. 10,000 working hours. RECI tube’s defines better laser beam, higher cutting efficiency, better quality.
Laser Tube Co2 RECI Power Options:
Emitted wave length: 10’600 nm
Ruida controller–Weni Co2 lasers are based on verified sub-assemblies, Ruida among others, which are the precursors of Co2 lasers control solutions.
Ruida controller is the main sub-assembly, controlling the operation of the whole device. It ensures stable operation and broad configuration options of Weni lasers, such as adding in option: rotating adapter, auto focus function, CCD system for cutting by contour, Wi-Fi communication and others. The controller enables, in a basic scope, to operate the laser without the use of software, where a given design may be directly imported from FLASH/USB disc.
|Precise motors and LEADSHINE controllers guarantee the precision of movement and high repeatability, which is a very important element of every device in the course of production process. The usage of additionally sustainable DC magnets in the construction of DC motors additionally enables continuous, solid work. For that reason, DC motors are most commonly used in the industry for constructing small mechanical devices and robots, where the sustainability and reliability are crucially important.|
|PMI/HIWIN/THK rail guides ensure high precision of positioning, repeatability and durability. Rail guides provide smooth movement of the trolley thanks to the usage of rolling elements – balls or rolls. The difference between static and dynamic rolling resistance is very small. Because of that, the power needed to start-up is only slightly higher than the power sustaining the movement. That is why, the stick-slip effects in Weni brand lasers do not occur.|
|Omron Electronic Components are electric sub-assemblies such as sensors, transmitters, inductors and other fundamental elements of electric system. Thanks to its technology and knowledge enabling to build sub-assemblies for almost every electronic system, Omron Electronic Components is able to provide guarantee and quality at the highest possible level.|
Professional cooler for Weni Co2 lasers.
The so called CW 3000-5200Chiller used for cooling industrial water. The main function of the device is to lower the temperature to the value specific for a given device. It is equipped with a display and controller for cooling process monitoring. In case of exceeding maximum permissible temperature detection , an alarm will be started and the connected laser will not be turned on.
|Wi-Fi controller ensures wireless and stable connection with Weni Solution lasers. Thanks to the use of function of Wi-Fi connection, controlling many lasers may be conducted with the use of only one computer.|
|All Weni Solution lasers have stainless steel joint elements which makes the device easy to keep clean and enables its proper exploitation.|
Weni lasers are equipped with two working tables as a standard, one, the so called „knife” and the “honeycomb”one. The knife table is used for cutting big, rigid elements, whereas the honeycomb one is ideal for processing small, elastic materials which must stay on the table in a specific position after cutting.
Ventilator – fumes exhaust
|Lens and mirrors are made with high precision. They are characterized by sustainability and increased mechanical resistance thanks to an additional layer protecting the surface.|
The using of Weni Co2 lasers is easy and intuitive, based on the RDWorks software. RDWorks, together with the manual in Polish/English is delivered with every Weni laser. The software has lifetime license and may be used interchangeably on many workplaces.
The most important RDWorks functions :
We know that each of our clients is looking for an offer tailored to their needs. .Therefore, we prepared a wide range of financing possibilites and the terms of purchasing our machines.
The application of the 23% VAT rate will take place at the domestic delivery, i.e. that the device will be delivered from a warehouse in the country (Poland)
If the VAT number is inactive or a domestic delivery is required, a VAT invoice will be issued at a rate of 23%.
Most of the devices require an order for production or adjusting to the individual needs of the customer, so payment can be made in stages.The spliting of payments in time doesn’t include any additional fees and allows our customers to invest in development the most friendly and flexible way. To reconcile the details, please contact our sales representative.
For the execution of orders requiring longer time as one month, we offer a full VAT invoice, after receiving the initial payment. Such a solution allows to optimize costs to a certain extent and efficiently manage the company’s budget.
Choosing a cash payment accelerates the delivery time significantly, as the procedures related to the formalities of concluding a lease or a loan are skipped and order is executed under trade agreement which will be flexibly suited to your needs. In case the delivery time is urgent, we suggest a full prepayment form. This form will allow You to set the major priority on an order and further planning appointments for installation and training services.
PLN, EUR, USD, GBP
We offer the possibility of making deposits in any currencies:
PLN, EUR, USD and GBP.
All our equipment and machines are available for financing through leasing. We offer simple and fast procedures clear and attractive conditions,schedule of instalments , schedule of installments adjusted to the company’s capabilities, many solutions regarding the value of the initial fee and final buy-out.
Primarily, leasing is associated with tax benefits.The possibility of seperating VAT from the leasing installment, initial payment and redemption makes it a more favorable form of financing. Payment spreaded in time ensures full financial liquidity and stability.
As a trusted partner of the leading banks on the market, We’ve successfully accomplished many contracts,which confirms our references. We cooperate with banks and partners such as : Alior Bank, Pekao Leasing, Getin Bank, EFL, Raiffeisen Bank, X-leasing
Due to permament cooperation the formalities are kept to a minimum, which significantly speeds up the entire procedure and ultimately affects the delivery time.
The whole procedure starts with checking the creditworthiness, and after a positive decision and the initial payment, all formalities will be done through us. That kind of solution is highly valued by our clients.
|–||The form of purchase and location do not affect the warranty, service, support and other conditions of the offer.|
|–||By cash payment is meant the transaction by: cash, transfer or mixed form allowed in accordance with the regulations of the country.|
|–||The installation does not include: unloading at the place of delivery, ground prepartion (floor), electrical and ventilation installation.|