All WENI SOLUTION machines are constructed on the basis of the of the gained experience and tested components from renowned manufacturers. Due to restrictive quality control, precision and reliability of our devices may be achieved. The production process is conducted on the basis of ISO 9001 standard and, what is more, R&D CENTER quality department supervises the whole process. Thanks to that we are able to offer 5-year warranty for our products. Professional service which is available in the whole Europe will take care of systematic reviews which result in long and failure-free operation. We also provide technical and post-warranty support and in case of a machine failure we provide fast reaction of our service. We care of our references from clients and we are proud of every delivered machine.
Weni Solution CLM Series – The equipment for laser cleaning is a new generation of high-tech product for surface cleaning. The device is easy to install, user friendly and fully automated.
Using of CLM laser is intuitive, requires no additional operating resources and is completely maintenance-free.
Allows you to remove: resin, oil, stains, dirt, rust, tarnish, paint, etc.
The laser cleaning method solves problems that traditional methods couldn’t handle. The techniques used so far in the cleaning industry use chemistry and mechanical methods. Nowadays, environmental regulations are becoming more and more restrictive. Laser cleaning does not cause abrasion to the cleaned surface, is touchless and does not cause the material overheating.
The device is made of mechanical elements, electrical control, optical parts and a handle that absorbs shocks. The WS CLM is ideal for long term push-pull operation. The control cabinet is compact and space-saving and the handle is simple and mobile.
The special control system of the main unit has a clear interface and user friendly control software. Parameters can be set and adjusted as needed to achieve high laser control performance. Special spiral cleaning mode and scanning of length and width are set directly by the user to avoid “striping”. As with traditional laser cleaning, surface is not damaged in any way.
Professional optical design, a lens with high resistance to damage, high throughput and a mirror field of high focal length, are the features that distinguish the laser WS CLM and make them able to meet the requirements of each customer.
The laser cleaning process is suitable for different materials and is considered the most reliable and efficient solution. The laser cleaning machine consists of an optical system, a structural system and an electrical control system.
Below is the design of each of the subsystems.
1. Electronic control system
Includes: Laser source, control panel core, digital-to-analogue converter, controller, galvanometer and 7-inch touch screen.
First, the main control board controls the laser emission and shutdown via the DB25 interface and changes the laser frequency and power determined by the touch screen; then the main control board controls the digital-to-analogue conversion board via the galvanometer control interface to generate an analogue control signal to control the galvanometer drive board. The scanning speed, length and width can be set via a 7-inch touch screen controlled by the ARM main control board.
2. Optical Structure
The operating diagram of the optical system is shown in the figure above.
The galvanometer is driven by a motor to complete the scan to ± 7,5 °. The laser sends out a polymerized beam. First passes through the mirror and then to the galvanometer to complete the scan in the X direction. The outgoing scan beam enters the field. The mirror is focused on the working surface, creating a scanning trajectory.
Ablative Fiber Laser
Weni OEM LCD touchpad 7″
the ability to save 5 settings in cache memory
3.0m (5.0m optional*)
Cleaning surface width
Cleaning surface length
Cleaning speed (maximum)
Seria spiral ?
Resin, oil, stains, dirt, rust, coating & other
410 x 70 x 115mm
2.5 + 0.1Kg
1136 x 906 x 1443mm
Typ nakrętki lustra
One-phase 220V+10%, 50/60Hz AC
Working environment humidity
Operating ambient temperature
GB7247-87, ISO9001, CE
Rust removal (speed)
Oil removal (speed)
Paint removal (speed)
COMPARISON OF CLEANING METHODS
Dry Ice Cleaning
chemical cleaning agent, touch
contact dry ice，Non touch
cleaning agent, touch
chemical cleaning agent,
sand paper, grinding wheel
dry ice cleaning solution.
Excellent cleaning effect,high cleanliness
excellent, small cleaning range
Precision Controllable, High Precision
Uncontrollable, Poor Precision
Uncontrollable, General Precision
Unspecified Range Cleaning
Manual operation is simple, hand-held or automation process is complex
the operator is required to do pollution protection measures,
labor is very hard, need to do pollution protection measures
simple operation, hand-held or automation operation
need to add consumables manually.
high first investment, no consumables low maintenance cost
low first investment, high consumables cost
high first investment, low labor cost of consumables
medium first investment, high consumables cost
low first investment, medium consumables cost
We know that each of our clients is looking for an offer tailored to their needs. .Therefore, we prepared a wide range of financing possibilites and the terms of purchasing our machines.
We offer a purchase with a VAT rate of 0% ( so-called intra-Community delivery). Thus, an active VAT payer has the right to purchase the above-mentioned rate of 0%. To check whether the VAT payer status is active, please select the link below and enter your tax identification number.
The application of the 23% VAT rate will take place at the domestic delivery, i.e. that the device will be delivered from a warehouse in the country (Poland)
If the VAT number is inactive or a domestic delivery is required, a VAT invoice will be issued at a rate of 23%.
Most of the devices require an order for production or adjusting to the individual needs of the customer, so payment can be made in stages.The spliting of payments in time doesn’t include any additional fees and allows our customers to invest in development the most friendly and flexible way. To reconcile the details, please contact our sales representative.
For the execution of orders requiring longer time as one month, we offer a full VAT invoice, after receiving the initial payment. Such a solution allows to optimize costs to a certain extent and efficiently manage the company’s budget.
Choosing a cash payment accelerates the delivery time significantly, as the procedures related to the formalities of concluding a lease or a loan are skipped and order is executed under trade agreement which will be flexibly suited to your needs. In case the delivery time is urgent, we suggest a full prepayment form. This form will allow You to set the major priority on an order and further planning appointments for installation and training services.
PLN, EUR, USD, GBP
We offer the possibility of making deposits in any currencies:
PLN, EUR, USD and GBP.
All our equipment and machines are available for financing through leasing. We offer simple and fast procedures clear and attractive conditions,schedule of instalments , schedule of installments adjusted to the company’s capabilities, many solutions regarding the value of the initial fee and final buy-out.
Primarily, leasing is associated with tax benefits.The possibility of seperating VAT from the leasing installment, initial payment and redemption makes it a more favorable form of financing. Payment spreaded in time ensures full financial liquidity and stability.
As a trusted partner of the leading banks on the market, We’ve successfully accomplished many contracts,which confirms our references. We cooperate with banks and partners such as : Alior Bank, Pekao Leasing, Getin Bank, EFL, Raiffeisen Bank, X-leasing
Due to permament cooperation the formalities are kept to a minimum, which significantly speeds up the entire procedure and ultimately affects the delivery time.
The whole procedure starts with checking the creditworthiness, and after a positive decision and the initial payment, all formalities will be done through us. That kind of solution is highly valued by our clients.
List of recommended lessees selection:
Specjalista ds. leasingu
Departament Sprzedaży Bankowej oraz Klientów Kluczowych
m: +48 663 291 425
e: firstname.lastname@example.orgAlior Leasing Sp. z o. o.
ul. Zawiła 65L
m: +48 722 030 860
Pekao Leasing Sp. z o.o.
ul. Kapelanka 1, 30-347 Kraków
Departament Sprzedaży Bankowej oraz Klientów Kluczowych
m: +48 607301212
Getin Leasing SA
ul. Gwiaździsta 66
53-413 Wrocław (11 piętro)
m: +48 691 481249
Europejski Fundusz Leasingowy SA
Biurowiec MediaHUB, ul. Łąkowa 29, 90-554 Łódź
The form of purchase and location do not affect the warranty, service, support and other conditions of the offer.
By cash payment is meant the transaction by: cash, transfer or mixed form allowed in accordance with the regulations of the country.
The installation does not include: unloading at the place of delivery, ground prepartion (floor), electrical and ventilation installation.