Oops! It appears that you have disabled your Javascript. In order for you to see this page as it is meant to appear, we ask that you please re-enable your Javascript!

Customer Service Office


Fiber Laser - with two interchangeable tables & attachment for cutting pipes and profiles

Model: WS4015HM
Index: WS-4015HM

Net price from:

91241,87 €

adapt the device to your needs

Product price configurator

The final price of the device varies depending on the options selected.



excluding tax

* The presented price configuration is for information purposes, it is not a commercial offer


  • Raytools Autofocus laser head
  • Attachment for cutting pipes & profiles
  • Shneider Servo-Motors
  • Head screw drive PMI
  • THK/HIWIN linear guides
  • Cast-welded construction
  • CypCut Software
  • Nesting function
  • Airtac Pneumatics
  • Omron Electronics
  • 'Dual Cool' Cooling system
  • up to 5 years of warranty
  • Manual PL/EN

All WENI SOLUTION machines are constructed on the basis of the of the gained experience and tested components from renowned manufacturers. Due to restrictive quality control, precision and reliability of our devices may be achieved. The production process is conducted on the basis of ISO 9001 standard and, what is more, R&D CENTER quality department supervises the whole process. Thanks to that we are able to offer 5-year warranty for our products. Professional service which is available in the whole Europe will take care of systematic reviews which result in long and failure-free operation. We also provide technical and post-warranty support and in case of a machine failure we provide fast reaction of our service. We care of our references from clients and we are proud of every delivered machine.


Weni Solution H Series | Model WS4015HM –  New professional model  of “High Power” laser cutter with an additional load platform, spindle for pipes and profiles with a length of 3m or 6m and full enclosure.


In practice, it means two interchangeable working tables operating alternately, thus using the full production speed of the device. The ideal solution for full-dimensional production where the time of the material processing is most important.

The case of the HM has a 4-chamber extractor system, fully sliding side and front doors, an even additional camera installed with an  LCD monitor, which allows You to monitor working process of the machine. Laser includes two open tables with working area of 4000x1500mm and laser power up to 12000W.

The machines are characterized by high speed and the best parameters. The control system is located in a separate, freestanding cabinet, so it is not exposed to damage and disturbances related to the operation of the device and also makes operations much easier for customer . All axes are driven by the latest Schneider servo motors, which are characterized by high accuracy and very high durability. The device includes an efficient laser, auto focus, stable CypCut software with NESTING function (automatic optimization of project placement on the material), dual cooling system, voltage stabilizer, lubrication system and dust extraction system.

The use of heavy construction, made of high-quality metals alloys and submiting device in the process of long-term and special treatment removes resulting strains in the material, which significantly reduces vibrations, shocks and shakes, making the FM series characterized by high stiffness, stability and shock resistance,and the processed materials retain the given parameters.




All Weni brand fiber lasers are equipped with Auto Focus as standard.This function can be used for different focal lengths which are controlled by laser control system. The focal point will be automatically adapted in the cutting process in order to achieve the best cutting effect of metal sheets of different thickness. In practice it means the change of thickness of the processed material by the operator, without re-setting the focal length manually.



  • Free your hands

    We do not need manual adjustment. The focal length is controlled by the operating system which effectively prevents the errors or failures caused by manual operation.
  • Precision

    Increasing the focal length of the perforation. Separate setting of focal length of the perforation and focal length for cutting makes the cutting more precise.


  • Speed

    Auto focus. Automatically adjusts the most proper focal points in the process of trimming and cutting which greatly improves the speed of cutting.


  • Durability

    Built-in double cooling water systems provide fixed laser optics temperature which prevents the lens from overheating and extends their service life. Protective and collimation lenses carefully protect key components.



Technical Data

Model 4015HM
Brand Weni Solution
Platforms two interchangeable work platforms with spindle
Working field 4000x1500mm
Spindle X workfield pipe Φ20 – Φ200mm
profile 20*20 – 140*140mm
Spindle Y length 4000m lub 6000m
X- axis range 1500mm
Y- axis range 4000mm
Z- axis range 220mm
Addressed resolution 0,001mm
X/Y axis positioning accuracy 0.03mm / 1000mm
X/Y axis repeatability 0.02mm / 1000mm
X/Y axis maximum speed 100m/min
Z axis maximum speed 375mm/sec
Maximum spindle speed 500mm/s
Maximum acceleration 1.5G
Maximum platform load 900kg
Maximum spindle load 120kg
Closed Case YES / IP54 class – sliding side and front doors
Cutting process monitoring YES – camera system
Spindle clamp type manual / pneumatic (optional)
Head type Raytools
Autofocus TAK
Source type Raycus / IPG
Servo-motors Schneider
Drive transmission WMH Herion
Guides THK / HIWIN
Electrical installation Omron
Pneumatics Airtac
Head screw drive PMI
Operating system Windows 7 or higher
Communication Ethernet TCP/IP
Screen LCD 17″ or bigger
Software CypCut
Nesting function YES / PRO NESTING (platform) / optional spindle
Transmission gear lubrication system automatic
Maximum gas pressure in the installation 3000 kPa (30 bar)
Beam type aluminium / cast 0.373mrad
Voltage stabilizer YES
Cooling Dual Cool System / 13L/min
Manual controller YES/ Wi Fi – wireless
Laser power Raycus: 500W, 750W, 1000W, 1500W, 2200W, 3300W, …max 6000W
IPG: 500W, 750W, 1000W, 1500W, 2000W, …max 6000W
Maximum energy consumption 500W – 9,4kW
750W – 11,0kW
1000W – 12,7kW
1500W – 15,2kW
Operating range temperature 10-45°C.
Laser class 4
Quality ISO9001, CE
Voltage 1000W 3-phase / 380V 50Hz
voltage fluctations >5%
Dimensions (length * width * height) platform 4530*3566*2060 [mm] spindle 3m / 4400*600*900 [mm]
Total weight 7600kg

Materials gallery









Table of cutting speeds

Carbon steel
1mm8.0 – 13 m/min15 – 24 m/min24 – 30 m/min30 – 42 m/min40 – 55 m/min60 – 80 m/min70 – 90 m/min
2mm3.0 – 4.5 m/min5.0 – 7.5 m/min5.5 – 8.0 m/min7.0 – 9.0 m/min8.0 – 10 m/min9.0 – 12 m/min10 – 13 m/min
3mm1.8 – 3.0 m/min2.4 – 4.0 m/min3.5 – 4.8 m/min4.0 – 6.5 m/min4.5 – 6.5 m/min4.0 – 7.0 m/min4.0 – 7.0 m/min
4mm1.3 – 1.5 m/min2.0 – 2.4 m/min2.8 – 3.5 m/min3.5 – 4.5 m/min4.0 – 5.0 m/min4.2 – 5.5 m/min4.7 – 5.5 m/min
5mm0.9 – 1.1 m/min1.8 – 2.0 m/min2.5 – 3.0 m/min3.0 – 3.5 m/min3.0 – 4.2 m/min3.5 – 4.2 m/min3.8 – 4.5 m/min
6mm0.6 – 0.9 m/min1.4 – 1.6 m/min1.8 – 2.6 m/min2.5 – 3.2 m/min3.0 – 3.5 m/min3.0 – 4.0 m/min3.3 – 4.2 m/min
8mm- 0.8 – 1.2 m/min1.2 – 1.8 m/min1.8 – 2.6 m/min2.0 – 3.0 m/min2.2 – 3.2 m/min2.5 – 3.5 m/min
10mm- 0.6 – 1.0 m/min1.1 – 1.3 m/min1.4 – 2.0 m/min1.5 – 2.5 m/min1.8 – 2.5 m/min2.2 – 2.7 m/min
12mm- 0.5 – 0.8 m/min0.9 – 1.2 m/min1.2 – 1.6 m/min1.4 – 2.0 m/min1.6 – 2.0 m/min1.8 – 2.1 m/min
14mm- - 0.7 – 0.8 m/min0.9 – 1.4 m/min1.0 – 1.6 m/min1.5 – 1.8 m/min1.7 – 1.9 m/min
16mm- - 0.6 – 0.7 m/min0.8 – 1.2 m/min0.8 – 1.5 m/min0.8 – 1.5 m/min0.9 – 1.7 m/min
18mm- - 0.4 – 0.6 m/min0.7 – 1.0 m/min0.8 – 1.1 m/min0.9 – 1.2 m/min0.9 – 1.2 m/min
20mm- - - 0.6 – 0.8 m/min0.7 – 1.0 m/min0.8 – 1.1 m/min1.0 – 1.5 m/min
22mm- - - 0.4 – 0.6 m/min0.6 – 0.8 m/min0.7 – 0.9 m/min0.8 – 1.0 m/min
25mm- - - - 0.3 – 0.5 m/min0.4 – 0.6 m/min0.5 – 0.7 m/min
Stainless steel
1mm8.0 – 13 m/min18 – 25 m/min24 – 30 m/min30 – 42 m/min40 – 55 m/min60 – 80 m/min70 – 90 m/min
2mm2.4 – 5.0 m/min7.0 – 12 m/min10 – 17 m/min18 – 21 m/min20 – 30 m/min30 – 42 m/min40 – 55 m/min
3mm0.6 – 0.8 m/min1.8 – 2.5 m/min4.0 – 6.5 m/min8.0 – 12 m/min12 – 18 m/min18 – 24 m/min30 – 38 m/min
4mm- 1.2 – 1.3 m/min3.0 – 4.5 m/min6.0 – -9.0 m/min8.0 – 12 m/min10 – 18 m/min18 – 24 m/min
5mm- 0.6 – 07 m/min1.8 – 2.5 m/min3.0 – 5.0 m/min4.0 – 6.5 m/min8.0 – 12 m/min12 – 17 m/min
6mm- - 1.2 – 2.0 m/min3.0 – 4.3 m/min4.0 – 6.5 m/min6.0 – 9.0 m/min8.0 – 14 m/min
8mm- - 0.7 – 1.0 m/min1.5 – 2.0 m/min1.8 – 3.0 m/min4.0 – 5.0 m/min6.0 – 8.0 m/min
10mm- - - 0.8 – 1.0 m/min0.8 – 1.5 m/min1.8 – 2.5 m/min3.0 – -5.0 m/min
12mm- - - 0.5 – 0.8 m/min0.6 – 1.0 m/min1.2 – 1.8 m/min1.8 – 3.0 m/min
16mm- - - - 0.5 – 0.8 m/min0.6 – 0.8 m/min1.2 – 1.8 m/min
20mm- - - - - 0.5 – 0.8 m/min0.6 – 0.7 m/min
30mm- - - - - - 0.4 – 0.5 m/min
1mm4.0 – 5.5 m/min6.0 – 10 m/min20 – 25 m/min25 – 40 m/min40 – 55 m/min55 – 65 m/min80 – 90 m/min
2mm0.7 – 1.5 m/min2.8 – 3.6 m/min7.0 – 10 m/min10 – 18 m/min15 – 20 m/min25 – 35 m/min35 – 50 m/min
3mm- 0.7 – 1.5 m/min4.0 – 6.0 m/min7.0 – 10 m/min10 – 15 m/min13 – 18 m/min21 – 30 m/min
4mm- - 2.0 – 3.0 m/min4.0 – 5.5 m/min8.0 – 10 m/min10 – 12 m/min13 – 18 m/min
5mm- - 1.2 – 1.8 m/min3.0 – 4.0 m/min5.0 – 7.0 m/min6.0 – 10 m/min9.0 – 12 m/min
6mm- - 0.7 – 1.0 m/min1.5 – 2.5 m/min3.5 – 4.0 m/min4.0 – 6.0 m/min4.5 – 8.0 m/min
8mm- - - 0.7 – 1.0 m/min1.5 – 2.0 m/min2.0 – 3.0 m/min4.0 – 6.0 m/min
10mm- - - - 0.8 – 1.0 m/min1.0 – 2.1 m/min2.2 -3.0 m/min
12mm- - - - 0.6 – 0.8 m/min0.8 – 1.4 m/min1.5 – 2.0 m/min
16mm- - - - - 0.6 – 0.9 m/min1.0 – 1.6 m/min
20mm- - - - - - 0.6 – 0.9 m/min
1mm4.0 – 5.5 m/min6.0 – 10 m/min14 – 16 m/min25 – 35 m/min35 – 45 m/min50 – 60 m/min70 – 85 m/min
2mm0.5 – 1.0 m/min2.8 – 3.6 m/min4.5 – 6.5 m/min10 – 15 m/min10 – 15 m/min25 – 30 m/min30 – 40 m/min
3mm- 0.5 – 1.0 m/min2.5 – 3.5 m/min5.0 – 8.0 m/min7.0 – 10 m/min12 – 18 m/min15 – 24 m/min
4mm- - 1.5 – 2.0 m/min3.5 – 5.0 m/min5.0 – 8.0 m/min8.0 – 10 m/min9.0 – 15 m/min
5mm- - 1.4 – 1.6 m/min2.5 – 3.2 m/min3.5 – 5.0 m/min6.0 – 7.0 m/min7.0 – 9.0 m/min
6mm- - - 1.2 – 2.0 m/min1.5 – 2.5 m/min3.5 – 4.5 m/min4.5 – 6.5 m/min
8mm- - - 0.7 – 0.9 m/min0.8 – 1.5 m/min1.6 – 2.2 m/min2.4 – 4.0 m/min
10mm- - - - 0.5 – 0.8 m/min0.8 – 1.4 m/min1.5 – 2.2 m/min
12mm- - - - - 0.6 – 0.8 m/min0.8 – 1.5 m/min
16mm- - - - - - 0.6 – 0.8 m/min

*The values ​​given are only illustrative.

Examples of laser cutting costs

Process Stainless steel (1mm) Carbon steel (5mm)
Power consumption ~30 PLN / hour ~30 PLN / hour
Gas consumption ~49 PLN / hour (N2) ~35 PLN / hour (O2)
Consumables materials ~2 PLN / hour ~3 PLN / hour
Together ~81 PLN / hour ~68 PLN / hour

*The costs ​​given are only illustrative and may differ from actual costs


Pipes & Profiles

The HM series operates the length of pipes and profiles up to 6000mm, where after process only 15cm of material is left for Φ > 80mm in the rear clamp. The device uses the most accurate possible cutting methods, material guidance and control system. The material is attached by means of a sliding rear handle and guide front handle. The clamps in the spindle holders are pneumatic, which significantly speeds up the loading and handling process.


Types and dimmensions of processable profiles are shown in the table below:

*option of cutting open profiles

Project drafts
IPG Photonics is a leading producer of laser generators in the world. Years of experience guarantee the highest quality and the best parameters of laser beam.


Broad distribution network and maintenance facilities guarantee perfect technical support for our products. Warranty and post-warranty repairs are implemented by the laboratory in our plant.

YLR series laser generators are available in versions from 500W up to 2000W and YLS series from 2000W –up to 12000W.

Wuhan Raycus Fiber Laser Technologies Co., Ltd. is the leader in production of laser generators in the Asian market. Wuhan Raycus has an international team of specialists conducting development research, which enables to improve and develop laser generators.

Service and technical support departments are a big advantage of the company, and all the repairs of equipment are conducted directly at the client’s place. RFL series laser generators are available in the version from 500W up to 12000W.

The Lexium servo-motors series includes LXM AC servo drives that work with BCH2 servo motors.

They’re characterized by:

  • Reduced start-up time
  • Increasing profitability
  • Improving efficiency

Lexium servo drives and motors are part of MachineStruxure.
Schneider Electric’s latest generation of MachineStruxure TM is an intuitive machine automation solution with all the features you need to improve productivity and increase your profits.


MachineStruxure is a complete solution for machine manufacturers, providing benefits throughout the entire life cycle of the machine.

The nesting technique (Nested Based Manufacturing or NBM) greatly shortens and improves the manufacturing process, in particular when it comes to curved cuts.


The possibility of whole sheet plates positioning enables to use raw material more efficiently, which means reducing the amount of waste. Nesting enables optimal material use, and the function of cutting simulation allows to plan the production adequately.

Before performing appropriate processing, the simulation function shall determine the time needed for conducting the task.

CypCut laser cutting control system (in short CypCut) is a set of system software intended for flat laser cutting, including laser cutting, common function of setting and laser processing control. Most of its functions are used for processing the graphics, parameters setting, non-standard edition of cutting process, simulation and cutting process control.


CypCut software delivered together with the device allows to:

  • setting and saving technological parameters for the tasks
  • performing cutting in automatic mode
  • optimizing the displacement of elements
  • preventing the passing of the head over the places that were cut out
  • controlling the number of components, details and waste
  • automatically inserting the bridges supporting the detail in the sheet
  • autonesting – autonomous mode of details arranging by filling the sheet
  • saving and editing the graphics in *.lxd, *.dxf formats, as well as other formats on the basis of control system. There is a possibility of synchronizing the network with a personal computer and retrieving information from any media.
Voltage stabilizer (three-phase voltage regulator) has been designed in order to protect and provide high quality of supplying Weni Solution brand laser devices.


Equal and constant voltage without interferences is the basis of proper operation of each laser. It greatly improves the quality of cutting and the performance of laser generator.

AirTAC company is the producer of power pneumatics components producer being part of pneumatic systems, such as air preparation sets, wires, joints, distribution valves, as well as actuators, which are servomotors, linear and rotary drives and end-effectors.

PMI/HIWIN/THK track guides provide high positioning accuracy, high repeatability and durability.


Linear guides provide smooth movement of the trolley thanks to the use of rolling elements – beads or rolls. The difference between static and dynamic rolling resistance is very small, so that the force needed to start up is only slightly higher than the force supporting the movement. That is why the stick-slip effects in Weni’s brand lasers do not occur.
Omron Corporation – is a world automation leader. It provides different products and services in the field of industrial automation and electronic components.


The Omron company with the seat in Kioto in Japan has its branches in Singapore, Hong-Kong, Amsterdam and Chicago. The company employs over 37,000 people in 36 countries.

Advanced CW-6200 chiller is a device designed to ensure the optimum operating temperature of both the generator and the laser head. Advanced automatics used in our chillers enable to control the temperature of coolant precisely. Built-in alarm system informs the user about the exceeded of permissible work temperature, as well as the disruption in the flow of the cooling liquid.


We know that each of our clients is looking for an offer tailored to their needs. .Therefore, we prepared a wide range of financing possibilites and the terms of purchasing our machines.


VAT 0%


VAT 23%

We offer a purchase with a VAT rate of 0% ( so-called intra-Community delivery). Thus, an active VAT payer has the right to purchase the above-mentioned rate of 0%. To check whether the VAT payer status is active, please select the link below and enter your tax identification number.

The application of the 23% VAT rate will take place at the domestic delivery, i.e. that the device will be delivered from a warehouse in the country (Poland)

If the VAT number is inactive or a domestic delivery is required, a VAT invoice will be issued at a rate of 23%.


Most of the devices require an order for production or adjusting to the individual needs of the customer, so payment can be made in stages.The spliting of payments in time doesn’t include any additional fees and allows our customers to invest in development the most friendly and flexible way. To reconcile the details, please contact our sales representative.


For the execution of orders requiring longer time as one month, we offer a full VAT invoice, after receiving the initial payment. Such a solution allows to optimize costs to a certain extent and efficiently manage the company’s budget.


Choosing a cash payment accelerates the delivery time significantly, as the procedures related to the formalities of concluding a lease or a loan are skipped and order is executed under trade agreement which will be flexibly suited to your needs. In case the delivery time is urgent, we suggest a full prepayment form. This form will allow You to set the major priority on an order and further planning appointments for installation and training services.


We offer the possibility of making deposits in any currencies:



All our equipment and machines are available for financing through leasing. We offer simple and fast procedures clear and attractive conditions,schedule of instalments , schedule of installments adjusted to the company’s capabilities, many solutions regarding the value of the initial fee and final buy-out.


Primarily, leasing is associated with tax benefits.The possibility of seperating VAT from the leasing installment, initial payment and redemption makes it a more favorable form of financing. Payment spreaded in time ensures full financial liquidity and stability.


As a trusted partner of the leading banks on the market, We’ve successfully accomplished many contracts,which confirms our references. We cooperate with banks and partners such as : Alior Bank, Pekao Leasing, Getin Bank, EFL, Raiffeisen Bank, X-leasing
Due to permament cooperation the formalities are kept to a minimum, which significantly speeds up the entire procedure and ultimately affects the delivery time.


The whole procedure starts with checking the creditworthiness, and after a positive decision and the initial payment, all formalities will be done through us. That kind of solution is highly valued by our clients.



List of recommended lessees selection:

Maria Florek
Specjalista ds. leasingu
Departament Sprzedaży Bankowej oraz Klientów Kluczowych
m: +48 663 291 425
e: mflorek@aliorleasing.plAlior Leasing Sp. z o. o.
ul. Zawiła 65L
30-390 Kraków
Michał Stachowicz
Departament Sprzedaży
m: +48 722 030 860
e: Michal.Stachowicz@pekaoleasing.com.pl
Pekao Leasing Sp. z o.o.
ul. Kapelanka 1, 30-347 Kraków
Karol Kośmider
Departament Sprzedaży Bankowej oraz Klientów Kluczowych
m: +48 607301212
e: karol.kosmider@pd.ideagetin.pl
Getin Leasing SA
ul. Gwiaździsta 66
53-413 Wrocław (11 piętro)
Ingrid Napiórkowska
m: +48 691 481249
e: ingrid.napiorkowska@efl.com.pl
Europejski Fundusz Leasingowy SA
Biurowiec MediaHUB, ul. Łąkowa 29, 90-554 Łódź




The form of purchase and location do not affect the warranty, service, support and other conditions of the offer.
By cash payment is meant the transaction by: cash, transfer or mixed form allowed in accordance with the regulations of the country.
The installation does not include: unloading at the place of delivery, ground prepartion (floor), electrical and ventilation installation.



Ask a question about the selected product: Fiber Laser – with two interchangeable tables & attachment for cutting pipes and profiles: WS4015HM

Copyright © Weni.eu