WS1610C - RECI W4 - Stepper motors

All WENI SOLUTION machines are constructed on the basis of the of the gained experience and tested components from renowned manufacturers. Due to restrictive quality control, precision and reliability of our devices may be achieved. The production process is conducted on the basis of ISO 9001 standard and, what is more, R&D CENTER quality department supervises the whole process. Thanks to that we are able to offer 5-year warranty for our products. Professional service which is available in the whole Europe will take care of systematic reviews which result in long and failure-free operation. We also provide technical and post-warranty support and in case of a machine failure we provide fast reaction of our service. We care of our references from clients and we are proud of every delivered machine.

Description

WS-C Series
for engraving and cutting non-metal materials

It is characterized by a full, closed cover available in four different sizes. It is available in three options with RECI W2 PIK: 90-100W (nominal power 90W), RECI W4 PIK: 100-130W (nominal power 100W), RECI W6 PIK: 130-160W (nominal power 130W), RECI W8 PIK: 160-190W (nominal power 160W). which makes it ideal for cutting and engraving, and the use of the so-called rotating adapter (spindle) makes it possible to use the device for processing spatial forms such as bottles, mugs and cans.

WS-C series is equipped with a through table of a knife type with an additional adapter of a honeycomb type, Wi-Fi controller, laser marker of a “Red Cross” or “Red Dot” type and professional cooling system. WS-C series lasers may be additionally equipped with a lifted table, CCD system with a video camera used for cutting on contour or on the basis of markers, as well as auto focus. Big display window and Led backlit of working area makes it easier to observe the operation of the device.

All Weni Co2 lasers have stainless steel joint elements, high quality branded sub-assemblies, stable, tension free construction and thanks to the use of Wi-Fi controller, it is possible to control many lasers with only one computer. The operation of Weni Co2 lasers is easy and intuitive, based on the RDWorks professional software and reliable Ruida controllers.

Equipment included in the price
1. Work Field:	1000x600mm	1300x900mm	1600x1000mm	1800x1000mm
2. LaserTube:	W2 90-100W	W4 100-130W	W6 130-160W	W8 160-190W
3. Pass-through table
4. Additional honeycomb type overlay made for cutting
5. “Red Cross” laser marker to precisely indicate the working place
6. CW professional cooling system for a laser tube
7. Compressor used to cover the lens against dirt
8. Exhaust gas extraction system with a fan
9. Wi-Fi / USB / Ethernet TCP / IP communication
10. LCD display
11. RDWorks software
12. Free delivery within Poland
13. Manual PL / EN
14. up to 5 years of warranty

Optional equipment (extra paid)

1. Rotary table

2. Goggles

3. Elevated table up/down

4. Installation with training

5. Delivery within EU

6. CCD camera

7. Auto focus (real time)

8. Wireless controller

9. Voltage regulator

10. Second head “non metal”

11. Servo drive (Hybrid Motors)

⠀

Create your own device configuration, check current prices and send an inquiry in our product configurator:

Recommended

CO2 Laser

See product

CO2 Laser

See product

CO2 Laser

See product

CO2 Laser

See product

Fiber Marker

WS-RT

See product

Ablative fiber laser

CLM200 PRO

See product

Fiber Laser

1313FL

See product

Fiber Laser

3015HM

See product

Fiber Laser

3015H

See product

Fiber laser cutter

6020TL

See product

Fiber Laser

3015AM

See product

Fiber Laser

1510FL

See product

Parameters

Technical Data

Model	1006C	1309C	1610C	1810C
Brand	Weni Solution
Laser Power	W2 RECI / W4 RECI / W6 RECI / W8 RECI
Working Field	1000 x 600mm	1300 x 900mm	1600 x 1000mm	1800 x 1000mm
X – axis range	1000mm	1300mm	1600mm	1800mm
Y – axis range	600mm	900mm	1000mm	1000mm
Z – axis range	100mm
Addressed Resolution	4000 DPI
X/Y axis positioning accuracy	≤+0.05mm
X/Y axis repeatability	≤+0.03mm
X/Y axis maximum speed	80000mm/min
Engraving Speed	60000mm/min
Cutting speed	40000mm/min
Z axis maximum speed	375mm/sec
Maximum acceleration	1.2G
Working table type	knife and honeycomb /Pass-through / lifted -*optional
Working area lightning	50kg
Maximum platform load	YES – LED
Minimum character size (engraver)	1mm x 1mm
Positioning	laser marker “Red Cross” or “Red Dot” type
Head Type	Non Metal
Autofocus	YES – automatic focal length adjustment for flat materials – option*
Lens type	quartz Φ 20mm
Source type	glass tube Co2 – RECI, 10.6μm
Motors	Leadshine – High Precision stepper motors
Drive transmission	Drive belt
Drive Security	proximity sensors – double for each axis
Guides	THK / HIWIN / PMI / Other
Ellectric Installation	Omron
Jointing units	stainless steel
Pneumatics	Airtac
Operating System	Windows XP or higher
Communication	Ethernet TCP/IP / WiFi / USB
Controller	Ruida
Display	3.5” TFT
Software	RDWorks
Compatible software	COREL DRAW, PHOTOSHOP, AUTOCAD,TAJIMA,etc.
Supported file formats	.ai .dxf .plt .dst .dsb .eps .bmp .gif .jpg .jpeg .png .mng .ico .cur .tif .tiff .tga .pcx .wbmp .wmf .emf .jbg .j2c .jpc .pgx .ras.pnm. pgm .ppm .ska .raw
Matrix Creation	YES
CCD Camera/ contour cut	*option – shape detection or markers
Laser power control	0 – 100% controlled by software
Maximum gas pressure in the installation	1000 kPa (10 bar)
Beam type	aluminium
Rotary table / spindle	YES-*optional
Ventilator	YES – exhaust extractor
Cooling	chiller CW3000 / CW5000 / CW 5200
Control Panel	YES
Maximum energy consumption	~ 2,0kW
Temperature operating range	10-45°C.
Cover	closed IP54
Laser Class	4
Quality	ISO9001, CE
Power System	1-phase / 220V 50Hz voltage fluctuations >10%
*Dimensions (length width * height)**	122515901110m	14951908957mm	161221901110mm	181223901110mm
Total weight	330kg	400kg	480kg	550kg

Application

Materials gallery

CUTTING

PLEXI

LEATHER

CARDBOARD

WOOD

ENGRAVING

MDF

ACRILIC

CORIAN

See
more photos

Table of cutting speeds

MaterialType	MaterialThickness	Tube power
MaterialType	MaterialThickness	40W	60W	80W	100W	130W	150W	180W
Acrylic
	3mm	8 mm/s	25 mm/s	30 mm/s	35 mm/s	47 mm/s	62 mm/s	68 mm/s
	5mm	5 mm/s	17 mm/s	20 mm/s	25 mm/s	31 mm/s	36 mm/s	40 mm/s
	8mm	4 mm/s	5 mm/s	10 mm/s	15 mm/s	19 mm/s	25 mm/s	34 mm/s
	10mm	1 mm/s	3 mm/s	6 mm/s	9 mm/s	15 mm/s	21 mm/s	29 mm/s
	15mm	-	2 mm/s	5 mm/s	8 mm/s	12 mm/s	17 mm/s	19 mm/s
	20mm*	-	-	1 mm/s	1.5 mm/s	2.4 mm/s	5 mm/s	9 mm/s
	30mm*	-	-	-	-	-	1.5 mm/s	3 mm/s
MDF
	3mm	9 mm/s	15 mm/s	20 mm/s	23 mm/s	25 mm/s	30 mm/s	33 mm/s
	5mm	5 mm/s	10 mm/s	13 mm/s	15 mm/s	18 mm/s	21 mm/s	25 mm/s
	10mm	-	3 mm/s	5 mm/s	7 mm/s	9 mm/s	12 mm/s	14 mm/s
	15mm	-	-	2 mm/s	3 mm/s	5 mm/s	7 mm/s	10 mm/s
	20mm*	-	-	-	1 mm/s	1.5 mm/s	2 mm/s	3 mm/s
Leather
Leather	One layer	10 mm/s	20 mm/s	25 mm/s	30 mm/s	40 mm/s	50 mm/s	60 mm/s
Wood
	3mm	10 mm/s	15 mm/s	20 mm/s	25 mm/s	30 mm/s	35 mm/s	40 mm/s
	5mm	5 mm/s	10 mm/s	15 mm/s	20 mm/s	25 mm/s	30 mm/s	35 mm/s
	10mm	-	4 mm/s	8 mm/s	12 mm/s	15 mm/s	20 mm/s	25 mm/s
	15mm	-	-	4 mm/s	8 mm/s	11 mm/s	15 mm/s	18 mm/s
	20mm*	-	-	-	1 mm/s	2 mm/s	2.5 mm/s	3 mm/s
Clothing
Clothing	One layer	40 mm/s	60 mm/s	100 mm/s	200 mm/s	300 mm/s	400 mm/s	500 mm/s
Double-layer board
Double-layer board	2mm	15 mm/s	25 mm/s	35 mm/s	40 mm/s	45 mm/s	55 mm/s	65 mm/s
Paper
Paper	One layer	100 mm/s	120 mm/s	200 mm/s	200 mm/s	200 mm/s	200 mm/s	200 mm/s
Rubber
Rubber	4mm	15 mm/s	25 mm/s	30 mm/s	35 mm/s	40 mm/s	45 mm/s	50 mm/s

* not applicable to models 1630TC, 1830TC, 2030TC (maximum thickness is 15mm)

Other materials

Material	Engraving	Cutting
Acrylic	YES	YES
MDF	YES	YES
Leather	YES	YES
Wood	YES	YES
Clothes	YES	YES
Double-layer boards	YES	YES
Paper	YES	YES
Rubber	YES	YES
Fabric	YES	YES
Glass	YES	NO
Steel	YES	NO
Ceramics	YES	NO
Marble	YES	NO
Matt board	YES	YES

Material	Engraving	Cutting
Wood Venner	YES	YES
Fiber glass	YES	YES
Painted Metals	YES	YES
Roof Tiles	YES	NO
Plastic	YES	YES
Cork	YES	YES
Corian	YES	YES
Anodized aluminium	*	NO
Stainless steel	*	NO
Brass	*	NO
Titanium	*	NO
Uncoated Metal	*	NO
Melamine	YES	NO
*	*	*

Project drafts

Weni WS-1006C

Weni WS-1309C

Weni WS-1610C

Weni WS-1810C

Components

<!——>

	RECI laser tubes are characterized by high durability and precision. Their real life span is ca. 10,000 working hours. RECI tube’s defines better laser beam, higher cutting efficiency, better quality. Laser Tube Co2 RECI Power Options: W1 – max power ca. ~80W length 1050mm ϕ 80mm W2 – max power ca. ~100W length 1200mm ϕ 80mm W4 – max power ca. ~130W length 1400mm ϕ 80mm W6 – max power ca. ~150W length 1650mm ϕ 80mm Emitted wave length: 10’600 nm Cooling method: Water High voltage inducing method: DC Resonator’s type: glass DC
	Ruida controller – Weni Co2 lasers are based on verified sub-assemblies Ruida which among others are the precursors of Co2 lasers control solutions. Ruida controller is the main sub-assembly, controlling the operation of the whole device. It ensures stable operation and broad configuration options of Weni lasers, such as adding in option: Rotating adapter (spindle) Autofocus function CCD System with camera for cutting by countour WI-FI communication etc. The controller enables, in a basic scope, to operate the laser without the use of software, where a given design may be directly imported from FLASH/USB disc.
	Precise motors and LEADSHINE controllers guarantee the precision of movement and high repeatability, which is a very important element of every device in the course of production process. The usage of additionally sustainable DC magnets in the construction of DC motors additionally enables continuous, solid work. For that reason, DC motors are most commonly used in the industry for constructing small mechanical devices and robots, where the sustainability and reliability are crucially important.
	PMI/HIWIN/THK rail guides ensure high precision of positioning, repeatability and durability. Rail guides provide smooth movement of the trolley thanks to the usage of rolling elements – balls or rolls. The difference between static and dynamic rolling resistance is very small. Because of that, the power needed to start-up is only slightly higher than the power sustaining the movement. That is why, the stick-slip effects in Weni brand lasers do not occur. Main advantages of using this rail guides is: high rigidity, accuracy, unusual movement precision, compactness, user-friendly installation and handling.
	Omron Electronic Components are electric sub-assemblies such as sensors, transmitters, inductors and other fundamental elements of electric system. Thanks to its technology and knowledge enabling to build sub-assemblies for almost every electronic system, Omron Electronic Components is able to provide guarantee and quality at the highest possible level.
	Professional cooler CW 3000-5200 Chiller It is designed for cooling laser tube in our CO2 lasers, due to using distilled water in a closed circuit. Main task of this component is lowering water temperature for the optimize value of the machine. Chiller is equipped with display and controller which helps to observe cooling process. By activating the alarm and stopping the process of machine operation, the device protects the laser from damage. It allows to fully optimalize working process, cares about correct temperature of laser tube work process and makes cutting or engraving is stable during whole use process. A properly selected cooler extends the life and efficiency of the CO2 tube as well as the entire laser device
	Wi-Fi controller ensures wireless and stable connection with Weni Solution lasers. Thanks to the use of function of Wi-Fi connection, controlling many lasers may be conducted with the use of only one computer.
	Stainless steel joining elements occur in every device in Weni Solution offer, which contributes to keep the device clean and helps to provide proper exploitation. The basic properties of stainless steels used for the production of connecting elements (i.e. bolts, nuts, washers, etc.) include: Rust resistancy Creep resistance Easy processing Low weight for the strength properties it offers
	Two working tables: knife type and honeycomb board type are included in standard equipment in Weni’s Co2 lasers. Knife table is made for cutting larger and rigid elements, while honeycomb board will find perfect application in processing small & flexible materials that after cutting must remain on the table in a certain position. Main feauters of honeycomb type table: Low weight , high rigidity , stable structure Fast and easy assembly Environmental protection and resource saving Excellent performance in sound insulation, heat insulation, fire & shock resistance
	550W fan – A specialized, efficient fan for Co2 lasers that ensures the correct extraction of flue gas and dust from material handling. Modern fan provides adequate power with a capacity of 15m³ / min and mounting brackets allow you to mount the device anywhere.
	Lenses and mirrors are made with high precision. They are characterized by durability and increased mechanical resistance due to an additional coating protecting the surface. Absorbtion ?0,2% Increased durability 20% longer lifetime compared to competing companies Highest focus stability
	RDWorks software for Weni Solution Co2 lasers is an advance and intuitive solution, which allows the user to easily create even complex shapes and projects. Software cooperate directly with lasers controllers so process from designing to procesing is very fast. RDWorks with the PL instruction is a standard feauture of every Weni’s Co2 laser . The software has a lifetime license and can be used interchangeably at many workplaces. The most important RDWorks functions : Import and Export of files Wi-Fi support Multiple layer support ( min 20 layers ver. V.8.00 ) Grouping, de-grouping, transformations, objects positioning Matrix deployment function, objects copying Parameters file and settings for a given material library Used designs library Vector graphics designing and editing Variable text function e.g. date, serial number Cutting path optimization Bitmaps support for engraving function LGP technology function The so called curves edition and support Processing time simulation Design working field on a material simulation Design output data control The so-called rotating adapter (spindle) support – option* CCD system support (cutting by contour) – option* Advanced device parameters setting Suportted files extensions for import; .ai .dxf .plt .dst .dsb .eps .bmp .gif .jpg .jpeg .png .mng .ico .cur .tif .tiff .tga .pcx .wbmp .wmf .emf .jbg .j2c .jpc .pgx .ras.pnm. pgm .ppm .ska .raw
	system CCD Ruida
	auto-focus
	zdjęcie stół podnoszony
	zdjęcie stół obrotowy

Financing

We know that each of our clients is looking for an offer tailored to their needs. .Therefore, we prepared a wide range of financing possibilites and the terms of purchasing our machines.

CASH

VAT 0%

VAT 23%

We offer a purchase with a VAT rate of 0% ( so-called intra-Community delivery). Thus, an active VAT payer has the right to purchase the above-mentioned rate of 0%. To check whether the VAT payer status is active, please select the link below and enter your tax identification number.

https://ec.europa.eu/taxation_customs/vies/vieshome.do?locale=en

The application of the 23% VAT rate will take place at the domestic delivery, i.e. that the device will be delivered from a warehouse in the country (Poland)

If the VAT number is inactive or a domestic delivery is required, a VAT invoice will be issued at a rate of 23%.

SPLIT
PAYMENT

Most of the devices require an order for production or adjusting to the individual needs of the customer, so payment can be made in stages.The spliting of payments in time doesn’t include any additional fees and allows our customers to invest in development the most friendly and flexible way. To reconcile the details, please contact our sales representative.

LESS TAX,
WITH FULL
VAT INVOICE

For the execution of orders requiring longer time as one month, we offer a full VAT invoice, after receiving the initial payment. Such a solution allows to optimize costs to a certain extent and efficiently manage the company’s budget.

QUICK
REALISATION

Choosing a cash payment accelerates the delivery time significantly, as the procedures related to the formalities of concluding a lease or a loan are skipped and order is executed under trade agreement which will be flexibly suited to your needs. In case the delivery time is urgent, we suggest a full prepayment form. This form will allow You to set the major priority on an order and further planning appointments for installation and training services.

CURRENCY
PLN, EUR, USD, GBP

We offer the possibility of making deposits in any currencies:
PLN, EUR, USD and GBP.

LEASE

GOOD OFFER

All our equipment and machines are available for financing through leasing. We offer simple and fast procedures clear and attractive conditions,schedule of instalments , schedule of installments adjusted to the company’s capabilities, many solutions regarding the value of the initial fee and final buy-out.

BENEFITS

Primarily, leasing is associated with tax benefits.The possibility of seperating VAT from the leasing installment, initial payment and redemption makes it a more favorable form of financing. Payment spreaded in time ensures full financial liquidity and stability.

BANK

As a trusted partner of the leading banks on the market, We’ve successfully accomplished many contracts,which confirms our references. We cooperate with banks and partners such as : Alior Bank, Pekao Leasing, Getin Bank, EFL, Raiffeisen Bank, X-leasing
Due to permament cooperation the formalities are kept to a minimum, which significantly speeds up the entire procedure and ultimately affects the delivery time.

PROCEDURES

The whole procedure starts with checking the creditworthiness, and after a positive decision and the initial payment, all formalities will be done through us. That kind of solution is highly valued by our clients.

List of recommended lessees selection:

Maria Florek
Specjalista ds. leasingu
Departament Sprzedaży Bankowej oraz Klientów Kluczowych
m: +48 663 291 425
e: mflorek@aliorleasing.plAlior Leasing Sp. z o. o.
ul. Zawiła 65L
30-390 Kraków

Michał Stachowicz
Departament Sprzedaży
m: +48 722 030 860
e: Michal.Stachowicz@pekaoleasing.com.pl
Pekao Leasing Sp. z o.o.
ul. Kapelanka 1, 30-347 Kraków

Karol Kośmider
Doradca
Departament Sprzedaży Bankowej oraz Klientów Kluczowych
m: +48 607301212
e: karol.kosmider@pd.ideagetin.pl
Getin Leasing SA
ul. Gwiaździsta 66
53-413 Wrocław (11 piętro)

Ingrid Napiórkowska
Doradca
m: +48 691 481249
e: ingrid.napiorkowska@efl.com.pl
Europejski Fundusz Leasingowy SA
Biurowiec MediaHUB, ul. Łąkowa 29, 90-554 Łódź

–	The form of purchase and location do not affect the warranty, service, support and other conditions of the offer.
–	By cash payment is meant the transaction by: cash, transfer or mixed form allowed in accordance with the regulations of the country.
–	The installation does not include: unloading at the place of delivery, ground prepartion (floor), electrical and ventilation installation.

Downloads

Customer Service Office

bok@weni.eu

WS1610C- RECI W4 – Stepper motors

Technical Data

Materials gallery

Table of cutting speeds

Other materials

Navigation

Follow us on

Contact details

Logos Media Sp. z o.o.
ul. Podolska 18
48-300 Nysa

Customer Service Office

bok@weni.eu

WS1610C- RECI W4 – Stepper motors

Technical Data

Materials gallery

Table of cutting speeds

Other materials

Ask a question about the selected product: WS1610C – RECI W4 – Stepper motors: 1610C

Logos Media Sp. z o.o. ul. Podolska 18 48-300 Nysa

Logos Media Sp. z o.o.
ul. Podolska 18
48-300 Nysa