Fiber markers WS-RT it's highly efficient laser markers , used for engraving, marking all metals and most other materials. There are 2 models available: WS-RT 0101 with a working area of 100x100, WS-RT 0202 with a working area of 200x200. Available powers: 20, 30, 50W.
Also check our lasers AVAILABLE
The choice of table size depends on the planned projects, their size and sheet sizes. We recommend choosing a larger working area, which gives more possibilities and works well when accepting various orders.
To cut high-reflectivity materials such as copper, brass, gold, and silver, we recommend choosing an IPG laser generator. In the case of MAX PHOTONICS and RAYCUS, there is a high risk of generator failure/damage.
The power of the fiber marker affects the marking time and the final result. For metal materials and deeper engravings, it is recommended to select a higher power (50W), thanks to which the laser works on the so-called "single pass", no need for repetitions. For non-metallic materials and for shallower engraving, marking machines with powers of 30 W and 50 W are sufficient.
To cut high-reflectivity materials such as copper, brass, gold, and silver, we recommend choosing an IPG laser generator. In the case of MAX PHOTONICS and RAYCUS, there is a high risk of generator failure/damage.
