hello world!

See how the device works:

General information
Configuration
Technical parameters
Application
Additional information

Model: WS C for non-metals

CO2 laser - for cutting and engraving of non-metallic materials

The WS-C models are closed-case CO2 lasers, affordable and high-quality, ideal for cutting non-metallic materials and for engraving. Thanks to the use of an additional option, which is a rotary attachment, it can also be used to process spatial solids, which makes the laser a multi-task device in the production process. RECI laser tubes used in this series are characterized by high durability and precision. Their real service life is approx. 10,000 working hours.

See also similar models to the one being viewed:

  • with housing, with metal cutting function -> WS-CM
  • without housing for non-metals -> WS-B
  • without housing for metals and non-metals -> WS-BM
  • with belt table -> WS-TC

Also check our lasers AVAILABLE

Download a product card
More photos
FAQ

Machinable materials

Plexiglass
Leather
Wood
Cardboard
MDF
Acrylic
Corian
Marble

Approximate net calculation:

100,000.00 zł
The presented price offer is informative. It does not constitute a commercial offer within the meaning of Art. 66 par. 1 of the Civil Code, but only an introduction to negotiations.
Prices vary depending on the option selected. Customize the device according to your needs:
An update of this model is underway. Contact us to get a price.

Standard equipment

Lifting table: knife with an additional honeycomb overlay
Professional CW cooling system
Glass Co2 tube - RECI, 10.6μm
Efficient Fan
RDWorks
Linear guides THK PMI Hiwin Inne
Red Cross or Red Dot laser marker
Quartz lenses
Wi-Fi
Ruid's controller
Leadshine - High Precision stepper motors
Instruction PL / EN
Mini compressor
Warranty up to 5 years

Do you need spare parts or accessories for your laser?

You can buy them now in our official online Weni Store!

Product description

WS-C models are characterized by a fully closed housing, with a work table available in four sizes: 1000x600mm, 1300x900mm, 1600x1000mm, 1800x1000mm. The devices are available in options with RECI tubes with the power of: W2 PIK: 90-100W (nominal / working power 90W), W4 PIK: 100-130W (nominal / operating power 100W), W6 PIK: 130-160W (nominal / working power 130W), W8 PIK: 150-180W (nominal / working power 150W). WS-C laser cutters are ideal for cutting and engraving, and by using an additional option, the so-called rotary attachment (spindle), you can also process three-dimensional solids, such as bottles, cups or cans. As standard, the WS-C series is equipped with a knife-type pass-through table with an additional honeycomb overlay, a Wi-Fi controller, a "Red Cross" or "Red Dot" laser marker and a professional cooling system. Lasers WS-C can be additionally equipped with a lifting table, CCD system with a camera for contour cutting or on the basis of markers and auto focus. The large display case and the working area illuminated by LED diodes facilitate the observation of the device's operation.
All Weni Co2 lasers have; stainless connecting elements, high-quality branded components, a stable structure free of stresses arising during the production process, and thanks to the use of a Wi-Fi controller, many lasers are controlled using one computer. The operation of Weni Co2 lasers is simple and intuitive, based on professional RDWorks software and reliable Ruida controllers.
* The data on the website is illustrative and may vary depending on the configuration, version and update of manufactured models as well as individual customer requirements. Detailed information is available after contacting us.

Device configuration

Model & workfield sizes

The choice of the model depends on the client's expectations, planned production, prepared budget and many other factors. The models differ in the purpose, size and type of the work table, the possibility of cutting profiles, parameters, etc.

In the case of low-volume productions, small elements and for the company's production needs, it is best to choose the table size for the most commonly cut sheets, usually these are smaller sizes. In a situation where the manufacturing company accepts orders from the outside, it is recommended to choose a larger table, in the case of a project to cut a large element from one sheet.

To cut high-reflectivity materials such as copper, brass, gold, and silver, we recommend choosing an IPG laser generator. In the case of MAX PHOTONICS and RAYCUS, there is a high risk of generator failure/damage.

Choose an option:

Laser tube power

Attention! It is not possible to mount the W8 tube when choosing the size of the working area of ​​1300x900mm and 1000x600mm!

The power of the tube should be adequate to the planned production and the type and thickness of the materials to be cut. The power of the tube cannot be greatly overestimated, because precise control starts from 10% of the source's power. All our glass tubes are of the proven and reputable RECI brand, in this model powers from W2 to W8 are available.

To cut high-reflectivity materials such as copper, brass, gold, and silver, we recommend choosing an IPG laser generator. In the case of MAX PHOTONICS and RAYCUS, there is a high risk of generator failure/damage.

Choose an option:

Installation with training

The purchase of this service is highly recommended because provides full warranty and safe and quick installation by a qualified team, co saves time employees. During the training, all instructions are provided related to, among others: efficient operation of the device, discussion of consumables, parameter settings and the possibility of obtaining many other valuable information. Without proper training, it is easy to make a mistake resulting from ignorance, after which the repair of the device may be considered paid and not covered by the warranty.

To cut high-reflectivity materials such as copper, brass, gold, and silver, we recommend choosing an IPG laser generator. In the case of MAX PHOTONICS and RAYCUS, there is a high risk of generator failure/damage.

Choose an option:

Protective goggles

They provide eye protection while working on the device. Shields used in our models protect against radiation incident from any angle. Specialized glasses provide filtration in a specific range of radiation. Laser light in the range of visible and invisible radiation from 400 nm to 1400 nm also illuminates the inside of the eye. Its action causes the retina to warm up and the photoreceptors to be destroyed. Invisible radiation is largely absorbed by the cornea and lens of the eye, damaging them and leading to burns. A case is included with each glasses.

To cut high-reflectivity materials such as copper, brass, gold, and silver, we recommend choosing an IPG laser generator. In the case of MAX PHOTONICS and RAYCUS, there is a high risk of generator failure/damage.

Choose an option:

Hybrid engines with error correction (hybrid motors)

They prevent losing steps during laser operation. They ensure uninterrupted and trouble-free work devices.

To cut high-reflectivity materials such as copper, brass, gold, and silver, we recommend choosing an IPG laser generator. In the case of MAX PHOTONICS and RAYCUS, there is a high risk of generator failure/damage.

Choose an option:

CCD Camera

It increases the possibilities laser, allows you to cut projects along the contour.

* This option cannot be used with Autofocus.

To cut high-reflectivity materials such as copper, brass, gold, and silver, we recommend choosing an IPG laser generator. In the case of MAX PHOTONICS and RAYCUS, there is a high risk of generator failure/damage.

Choose an option:

Auto Focus [Real Time]

It increases the possibilities of the device because it enables cutting and engraving on spatial materials, e.g. boxes, furniture, albums, etc. Indispensable when working on materials that tend to deform, e.g. under the influence of temperature. Thanks to this option, the device automatically selects the focal length, which guarantees the highest quality cutting. Useful especially when working on materials such as fabrics, plywood, etc.

* This option cannot be used with a CCD Camera.

To cut high-reflectivity materials such as copper, brass, gold, and silver, we recommend choosing an IPG laser generator. In the case of MAX PHOTONICS and RAYCUS, there is a high risk of generator failure/damage.

Choose an option:

Wireless controller

It facilitates the work of the machine operators. Indispensable especially when working with large devices.

To cut high-reflectivity materials such as copper, brass, gold, and silver, we recommend choosing an IPG laser generator. In the case of MAX PHOTONICS and RAYCUS, there is a high risk of generator failure/damage.

Choose an option:

Voltage stabilizer

We recommend this option to everyone working with laser technology.

Apply a voltage stabilizer quickly it even eliminates long-term voltage drops thanks to the servos used.

In order for the cutting process to maintain quality, the laser cutter needs a stable mains voltage.

Large devices operating in the same network generate momentary voltage drops that may disrupt the operation of the laser.

Voltage drops can turn off the laser beam and waste material, and in extreme cases, damage the device.

To cut high-reflectivity materials such as copper, brass, gold, and silver, we recommend choosing an IPG laser generator. In the case of MAX PHOTONICS and RAYCUS, there is a high risk of generator failure/damage.

Choose an option:

Spindle (rotary table)

Thanks to the high torque and precise guidance, the machined edge is perfectly finished. The tool has a chip extraction system.
High-speed spindle of the well-known Japanese brand Nakanishi with a power of 360W and revolutions of 60,000 / min with full servo control - controllers, ideal for machining hard materials such as. MDF, DIBOND, ACRYLIC, PVC, RUBBER.

To cut high-reflectivity materials such as copper, brass, gold, and silver, we recommend choosing an IPG laser generator. In the case of MAX PHOTONICS and RAYCUS, there is a high risk of generator failure/damage.

Choose an option:

Lifting table [up / down]

Increases the capabilities of the device because it enables cutting and engraving on spatial materials, e.g. boxes, furniture, albums, etc.

To cut high-reflectivity materials such as copper, brass, gold, and silver, we recommend choosing an IPG laser generator. In the case of MAX PHOTONICS and RAYCUS, there is a high risk of generator failure/damage.

Choose an option:

Second head for non-metals

Twice the speed of the cutting process, with a slight reduction of the working area. The option of installing a second head for non-metals results from individual customer needs and projects.

To cut high-reflectivity materials such as copper, brass, gold, and silver, we recommend choosing an IPG laser generator. In the case of MAX PHOTONICS and RAYCUS, there is a high risk of generator failure/damage.

Choose an option:

The bending machine as a peripheral device for the CO2 laser guarantees precise and repeatable bending of acrylic, which speeds up production and increases efficiency. Thanks to the multi-functionality of the tools, the user has greater flexibility in designing a variety of plexiglass shapes. Time and cost savings, as well as safe operation, are other benefits you will gain by opting for the bending machine. The specific bending machine is individually selected for the customer.

To cut high-reflectivity materials such as copper, brass, gold, and silver, we recommend choosing an IPG laser generator. In the case of MAX PHOTONICS and RAYCUS, there is a high risk of generator failure/damage.

Choose an option:

Protective goggles

To cut high-reflectivity materials such as copper, brass, gold, and silver, we recommend choosing an IPG laser generator. In the case of MAX PHOTONICS and RAYCUS, there is a high risk of generator failure/damage.

Choose an option:

Branded components

Click the tab to learn more about the component:

RECI laser tubes are characterized by high durability and precision. Their real service life is: approx. 10,000 working hours. RECI tube means better beam quality, higher cutting efficiency, better quality of workmanship.

The laser Co2 RECI tube is available in various power options:

  • W1 - max power approx: ~ 80W | length 1050mm | ? 80mm
  • W2 - max power approx: ~ 100W | length 1200mm | ? 80mm
  • W4 - max power approx: ~ 130W | length 1400mm | ? 80mm
  • W6 - max power approx: ~ 150W | length 1650mm | ? 80mm
  • W8 - max power approx: ~ 180W | length 1800mm | ? 80mm

Emitted Wavelength: 10'600 nm
Cooling method: Water
High voltage excitation method: DC
Resonator Type: Glass DC

Ruid's controller - Weni Co2 lasers are based on proven Ruida components, which are a precursor in Co2 laser control solutions. The Ruida controller is the main component controlling the operation of the entire device. It ensures stable operation and a wide configuration range of Weni lasers through the possibility of adding in the option:

  • Rotary attachment (spindle)
  • Autofocus function
  • CCD system for contour cutting
  • Wi-Fi communication and others

In the basic scope, the controller allows you to operate the laser without the use of software, where a given project can be imported directly from a FLASH / USB disk.

Precise motors and LEADSHINE drivers ensure precision of movement and high repeatability. It is a very important element of each device in the production process. The use of a DC motor and permanent magnets in the construction allows for continuous and stable operation. Thanks to this design, these motors are used in industry in the construction of small mechanical devices and robots, where durability and reliability play a significant role.

PMI / HIWIN / THK rail guides ensure high positioning accuracy, high repeatability and durability. They ensure smooth movement of the trolley thanks to the use of rolling elements - balls or rollers. The difference between static and dynamic rolling friction is very small, so that the starting force is only slightly greater than the force supporting the movement. Thanks to this type of solution, stick-slip effects do not occur in Weni brand lasers.

The main advantages of linear guides are : high stiffness, accuracy, extreme precision of movement, compactness, easy assembly and operation.

Omron Electronic Components are electrical components such as sensors, relays, coils and other fundamental elements of an electrical installation. Thanks to the technology and knowledge that allows us to build components for most devices on the market, Omron components are able to provide a guarantee and quality at the highest level.

Professional refrigerator CW 3000-5200 is designed to cool the laser tube in Co2 Weni lasers, using distilled water in a closed circuit. The main task of the device is to lower the water temperature to the value appropriate for the machine.

It has a display and a controller to monitor the cooling process. By triggering the alarm and stopping the machine operation process, the cooler protects the laser from damage. It allows for full optimization of the machining process, maintains the correct operating temperature of the laser tube and makes the cutting or engraving uniform throughout the entire use process. A properly selected cooler extends the life and efficiency of the CO2 tube and the entire laser device.

WI-FI controller provides a wireless and stable connection with Weni Solution lasers. Thanks to the Wi-Fi connection function, controlling multiple lasers can
can be performed using one computer, which makes the operation more convenient than ever before.

Stainless connecting elements they are present in all Weni Solution lasers. which contributes to keeping the device clean and its correct operation. The basic properties of stainless steels used for the production of connecting elements (i.e. bolts, nuts, washers, etc.) include:

  • Corrosion resistance
  • Incandescence
  • Ease of processing
  • Low weight for its strength properties

Two work tables: The knife and honeycomb are included in the standard equipment of Weni Co2 lasers. The knife table is used to cut large, rigid elements, while the honeycomb is ideal for processing small, flexible or materials that must remain on the table in a specific position after cutting.

The most important features:

  • Low weight, High rigidity, Stable structure
  • Easy and quick installation
  • Environmental protection and resource saving
  • Excellent performance in sound insulation, heat insulation, fire resistance and shock resistance
550W fan - A specialized, efficient fan for Co2 lasers ensures the correct extraction of fumes and dust generated during material processing. A modern fan provides sufficient power with a capacity of 15m 3 / min and the mounting brackets allow you to mount the device anywhere.
Lenses and mirrors are made with high precision. They are characterized by durability and increased
mechanical resistance thanks to an additional surface protecting coating.

  • Absorption? 0.2%
  • Increased durability
  • 20% longer service life compared to competing companies
  • Highest focus stability

RDWorks software for Co2 lasers Weni is an advanced and intuitive solution that allows you to easily create even the most complex projects. The program works directly with the laser, so the transition from design to machine operation is very quick.

RDWorks together with the PL instruction, it is attached to each Weni laser. The software has a lifetime license and can be used interchangeably on many workplaces.

Technical parameters

Models available:
Model
WS-1006C
WS-1309C
WS-1610C
WS-1810C
The power of the laser tube
RECI W2, W4, W6, W8
Working field
1000 x 600mm
1300 x 900mm
1600 x 1000mm
1800 x 1000mm
X axis range
1000mm
1300mm
1600mm
1800mm
Y axis range
600mm
900mm
1000mm
1000mm
Z axis range
100mm
Addressed resolution
4000 DPI
X / Y axis positioning accuracy
≤ + 0.05mm
X / Y axis repeatability
≤ + 0.03mm
X / Y axis max speed
80000mm / min
Engraving speed
60000mm / min
Cutting speed
40000mm / min
Z axis max speed
375mm / sec
Max acceleration
1.2G
Maximum load on the platform
50kg
Workbench lighting
YES- LED
Minimum character size (engraver)
1mm x 1mm
Positioning
"Red Cross" or "Red Dot" laser marker
Head type
Non Metal
Autofocus
YES - automatic focusing for flat materials - option *
Type of lens
quartz Φ 20mm
Type of source
Co2 glass tube - RECI, 10.6μm
Motors
Leadshine - High Precision stepper motors
Drive transmission
drive belt
Drive protection
proximity sensors - double for each axis
Guides
THK / HIWIN / PMI / Others
Electrical installation
Omron
Connecting elements
stainless steel
Pneumatics
Airtac
Operating system
Windows XP or later
Communication
Ethernet TCP / IP and / or USB
Controller
Ruida
Display
3.5 ”TFT
Software
RDWorks
Compatible software
COREL DRAW, PHOTOSHOP, AUTOCAD, TAJIMA, etc.
Supported file formats
.ai .dxf .plt .dst .dsb .eps .bmp .gif .jpg .jpeg .png .mng .ico .cur .tif .tiff .tga .pcx .wbmp .wmf .emf .jbg .j2c .jpc .pgx .ras.pnm. pgm .ppm .ska .raw
Creating a matrix
YES
CCD camera / contour cutting
* optional - shape detection or markers
Laser power control
0 - 100% software controlled
Maximum gas pressure in the installation
1000 kPa (10 bar)
Gateway type
aluminum
Rotary table / spindle
YES- * optional
Fan
YES - exhaust extractor
Cooling
chiller CW3000 / CW5000 / CW 5200
Control panel
YES
Max energy consumption
~ 2.0kW
Working temperature range
10-45 ° C.
Case
closed IP54
Laser class
4
Quality
ISO9001, CE
Power
1-phase / 230V 50Hz voltage fluctuation> 10%
Dimensions (length * width * height)
1225 * 1590 * 1110mm
1495 * 1908 * 957mm
1612 * 2190 * 1110mm
1812 * 2390 * 1110mm
Total mass
330kg
400kg
480kg
550kg

Cutting table

Cutting speed table

Material Thickness W2 W4 W6 W8
Akrylic 3mm 35mm/s 47mm/s 62mm/s 68mm/s
5mm 25mm/s 31mm/s 36mm/s 40mm/s
8mm 15mm/s 19mm/s 25mm/s 34mm/s
10mm 9mm/s 15mm/s 21mm/s 29mm/s
15mm 8mm/s 12mm/s 17mm/s 19mm/s
20mm 1.5mm/s 2.4mm/s 5mm/s 9mm/s
30mm - - 1.5mm/s 3mm/s
MDF 3mm 23mm/s 25mm/s 30mm/s 33mm/s
5mm 15mm/s 18mm/s 21mm/s 25mm/s
10mm 7mm/s 9mm/s 12mm/s 14mm/s
15mm 3mm/s 5mm/s 7mm/s 10mm/s
20mm 1mm/s 1.5mm/s 2mm/s 3mm/s
Leather jedna warstwa 30mm/s 40mm/s 50mm/s 60mm/s
Wood 3mm 25mm/s 30mm/s 35mm/s 40mm/s
5mm 20mm/s 25mm/s 30mm/s 35mm/s
10mm 12mm/s 15mm/s 20mm/s 25mm/s
15mm 8mm/s 11mm/s 15mm/s 18mm/s
20mm 1mm/s 2mm/s 2.5mm/s 3mm/s
Textiles jedna warstwa 200mm/s 300mm/s 400mm/s 500mm/s
Two-layer disc 2mm 40mm/s 45mm/s 55mm/s 65mm/s
Paper jedna warstwa 200mm/s 200mm/s 200mm/s 200mm/s
Rubber 4mm 35mm/s 40mm/s 45mm/s 50mm/s
Material Engraver Cutting
Glass YES NO
Ceramics YES NO
Marble YES NO
Matte board YES YES
Wooden veneer YES YES
Fiberglass YES YES
Tile YES NO
Plastic(PMMA) YES YES
Cork YES YES
Corian YES YES
Melamine YES YES
Karton YES YES
Plexiglass YES YES

Technical image

Select a workspace

1000x600
1300x900
1600x1000
1800x1000

Application

Weni Smart Care program

Free care and support-

WENI SOLUTION IS STANDARD

Weni Solution, our specialist financial and insurance department, helps our clients in a way that is noticeable to them. We offer free help and assistance in obtaining a convenient leasing or financing for the purchase of our equipment. We are a verified partner of most financial institutions.

Participation in the Weni SMART Care program, in other words, our specialist's care program pays off! Thanks to it, you can arrange the financing of your purchase quickly and easily, and above all for free.

You don't take any chances with us

WENI CARE AND WENI CARE + POLICY

Laser insurance against overvoltage, flooding, fire?

Now it's the "Weni Care" standard! Our clients receive a insurance policy for 12 months free of charge when purchasing all fiber cutters and cleaning lasers. In practice, however, for a small fee, you can buy a policy for each of our devices from the offer. Do you need more? Choose the PREMIUM "Weni Care +" solution

Featured Products

Let's talk!

If you want to talk about the details of the selected product, establish a non-standard configuration or learn more about our products, the sales department of Weni Solution is ready to help from 8 to 16 working days. You can contact us by phone, arrange a meeting over a good coffee, or chat with us.

Product manager

Languages available:

Poland

Languages available:

Accessories and Parts

Languages available:

Product inquiry

After selecting the appropriate configuration of the device, you can submit an inquiry by filling out our contact form. The selected option will be forwarded to our specialists who will prepare an appropriately personalized offer and provide all the necessary pre-purchase information.

Form Zapytanie EN

Downloads

Send the selected product configuration to the Weni team and we will contact you as soon as possible. Do you need more details? Use the contact form below on this page.
Form Zapytanie - konfigurator EN
Approximate Net Calculation300.000PLN
ZMIEŃ KONFIGURACJE
Contact us: +48 77 433 71 30

Download a product card

The selected file will be sent to the email address provided:
Email

The condition for downloading a product card is subscribing to the newsletter. I agree to receive information about the latest promotions and offers to the above e-mail address. All information on data processing can be found in our privacy policy

Follow us on:

Subscribe to the newsletter
Stay updated! Receive discount codes, promotions and information about new products.
© Copyright 2023 - Weni Solution - All rights reserved
The Weni Solution brand belongs to Logos Media Ltd
KRS: 0000774123 NIP: 7532452002 REGON: 382677620
Customer Service Office
(open from: 8am to 4pm)
envelopephone-handsetmap-markercrossmenu-circle